Mellanox Technologies MSX1024B-1BRS Guia de Instalação descarregar pdf (Página 20)

Configuring the Switch

Rev 1.0

Mellanox Technologies

2 Configuring the Switch

The procedures described in this chapter assume that you have already installed and powered-on

your switch according to the instructions in the Switch Installation Guide, this document.

2.1 Configuring the Switch for the First Time

Step 1. Connect the host PC to the Console (RJ-45) port of the switch system using the supplied cable.

The Console ports for systems are shown below as examples.

Figure 8: Console Port

Step 2. Configure a serial terminal program (for example, HyperTerminal, minicom, or Tera Term) on

your host PC with the settings described in

Table 4.

Make sure to connect to the Console RJ-45 port of the switch and not to the (Ethernet)

MGT port.

No remote IP connection is available at this stage.

Table 4 - Serial Terminal Program Configuration

Parameter Setting

Baud Rate 9600

Data bits 8

Stop bits 1

Parity None

Connect the host PC to here

SX1024

Mellanox

605958576

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 30 31

Sem comentários

Mellanox Technologies MSX1024B-1BRS Guia de Instalação Página 20